Inspection of Destroyed Real Estate in Poltava: Assessment of Technical Condition After Missile Strikes
Poltava is one of the cities that has suffered significant destruction as a result of missile strikes. According to the State Emergency Service (SES), as of December 30, 2025, damage to 259 apartments, over 350 broken windows, and more than 190 destroyed structural elements was recorded as a result of one of the strikes. Such extensive damage requires a technical inspection of destroyed real estate to determine the feasibility of further building operation, plan restoration work, and obtain compensation payments under the eRecovery (“єВідновлення”) program. The procedure is carried out in accordance with the Methodology for Inspecting Buildings and Structures Damaged as a Result of Emergencies, Hostilities, and Terrorist Acts, as well as in compliance with DBN V.1.2-14:2018. The purpose is to assess the residual load-bearing capacity of structures and substantiate decisions regarding the restoration, reinforcement, or dismantling of the object.
When Inspection of Destroyed Real Estate in Poltava is Necessary
The main grounds for ordering a technical inspection of damaged objects in Poltava are:
- recording damage caused by missile strikes, shelling, or falling debris to receive compensation under the eRecovery program;
- assessing the technical condition of buildings affected by blast waves to make a decision on major repairs, reconstruction, or demolition;
- the need to obtain an official inspection act for submission to local self-government bodies or insurance companies;
- planning restoration works on social infrastructure facilities that have also sustained damage.
Inspection works are carried out in areas where active phases of hostilities are absent, in accordance with the requirements of current legislation.
Specifics of Inspection in Poltava: Scale and Variety of Destruction
Conducting a technical inspection in Poltava has a number of specific aspects caused by the nature of the damage:
- Variety of damage types. Destruction ranges from local damage to windows and roofing to partial destruction of load-bearing structures. The inspection must cover all types of damage for correct classification and determination of the technical condition category according to DSTU 9273:2024.
- Blast wave damage. A blast wave can cause micro-cracks in concrete structures, disruption of the bond between reinforcement and concrete, and frame deformations that cannot be detected without special equipment.
- The need for prompt execution. High demand for inspections requires prompt execution of work without loss of quality. Prioritization of objects is carried out according to the degree of danger and urgency of restoration.
Stages of Technical Inspection in Poltava
The workflow includes the following consecutive stages:
- Preparatory stage. Review of available design and as-built documentation (if any). Identification of zones with the greatest destruction and planning of inspection routes.
- Visual inspection. Recording visible defects: cracks, deformations, spalling, moisture traces, and corrosion. Special attention is paid to structural joints and areas around window and door openings.
- Instrumental inspection. Performing geodetic measurements to determine vertical and horizontal deformations. Conducting ultrasonic testing of concrete and masonry. Thermal imaging diagnostics to detect hidden defects and thermal bridges.
- Desk study. Analysis of the data obtained, calculation of the residual load-bearing capacity of structures. Determination of the technical condition category according to DSTU 9273:2024.
- Preparation of a technical report. Drafting conclusions and recommendations regarding the further operation, restoration, or dismantling of the object.
Result of the Inspection and Its Legal Significance
The customer receives a technical report containing:
- an assessment of the building’s technical condition and individual structures;
- a list of identified defects with references to DBNs;
- calculations of residual load-bearing capacity;
- a conclusion on the technical condition category (operable, limited operable, emergency, unfit for operation);
- recommendations for further actions (restoration, reinforcement, demolition).
The report is registered in the Unified State Electronic System in the Construction Sector (EDESSB), which gives it legal validity for submission to local self-government bodies, the State Emergency Service (SES), insurance companies, or court. GlobalBud Ukraine provides a full cycle of technical inspection of real estate objects with subsequent registration of the report in EDESSB, which is a mandatory condition for receiving compensation payments. The process of preparing a technical report on the destruction of a building or structure is a separate stage that requires a professional approach and proper execution.
Cost and Timeframe of the Inspection
The cost of a technical inspection of destroyed real estate in Poltava is determined individually for each object. The main pricing factors are the building’s area, the degree of destruction, the number of structural elements requiring instrumental diagnostics, as well as the need to use special equipment. The timeframe for completing the work depends on the scale of damage and the complexity of the inspection.
Frequently Asked Questions
Is it possible to inspect destroyed real estate in Poltava without design documentation?
Yes, the inspection is carried out based on the actual condition ofрти structures. The lack of design documentation is not an obstacle to performingку the work. However, having a technical passport or archival drawings allows for higher accuracy in calculating the residual load-bearing capacity.
What documents are needed to receive compensation for damaged housing in Poltava?
To receive compensation underтік the eRecovery program, a commission inspection act compiled by an authorized local self-government body is required. A technical report by an independent expert registered in EDESSB can serve as additional evidence ofрти the extent of damage in the event of an appeal against the commission’s decision.
How long is the technical report on the inspection of destroyed real estate valid?
The technical report records the condition ofрти the object at the time of the inspection. In the event of prolonged maintenance of the damaged building without conservation or restoration, it is recommended to conduct a re-inspection after a certain period to assess the possible progression of destruction. For the purpose of obtaining compensation,рти the report is valid for the period determined by the relevant programs.
