Technical Inspection of Buildings in Rivne: Structural Assessment Amidst Urban Development and Stock Renewal

Technical Inspection of Buildings in Rivne: Structural Assessment Amidst Urban Development and Stock Renewal

Rivne is a city that has demonstrated stable development and active renewal of its residential stock in recent years. In 2025, 322.5 thousand m² of the total area of residential buildings was put into operation in the region. A significant portion of the existing stock consists of buildings erected in the 1960s–1980s, which require regular monitoring of their technical condition. In addition, capital repair and housing stock reconstruction programs are being implemented in the city, which requires a preliminary assessment of the actual structural condition. A technical inspection of buildings in Rivne makes it possible to identify hidden defects, assess the residual resource of structures, and substantiate decisions regarding repair, reconstruction, or reinforcement. The procedure is carried out in accordance with the requirements of DBN V.1.2-14:2018 and DSTU 9273:2024.

Grounds for Commissioning a Technical Inspection

According to DSTU-N B V.1.2-18:2016, technical inspections of buildings in Rivne must be carried out in the following cases:

• before purchasing or selling a real estate object — to confirm the absence of critical defects capable of significantly affecting market value;
• before reconstruction, storey superstructure additions, or change of functional purpose — to determine the feasibility of implementing design solutions without compromising structural reliability;
• upon detecting signs of an emergency condition — cracks, settlements, water infiltration, deformations indicating progressive destruction;
• upon expiration of the standard operational lifespan — for buildings erected in the 1960s–1980s;
• to obtain a technical conclusion when submitting documents to local self-government bodies or insurance companies.

For Rivne, where housing stock renewal programs are actively being implemented, a technical inspection is an integral component of preparation for capital repairs and reconstructions.

List of Works Within the Scope of Technical Inspection

A comprehensive engineering inspection of structures covers all load-bearing and enclosing structures, engineering systems, and improvement elements:

1. Foundation inspection — assessment of type, embedment depth, presence of deformations, cracks, waterlogging traces, condition of waterproofing and drainage systems. Uneven settlement, groundwater impact, and frost heaving are investigated.
2. Inspection of load-bearing structures — walls, columns, beams, trusses, floor slabs. The presence of cracks, distortions, deviations from the vertical, corrosion damage, rotting, and biological damage is determined.
3. Roofing and facade inspection — checking tightness, condition of roofing material, truss system, drainage; assessment of facade panels, plaster, insulation.
4. Thermal imaging inspection — identifying thermal bridges, insulation breaches, wall freezing, leaks in window and door units, and hidden moisture zones.
5. Instrumental inspection — use of thermal imagers, moisture meters, testers to assess the condition of electrical networks.
6. Engineering system analysis — assessment of water supply, sewerage, heating, power supply, and ventilation systems for operability and compliance with standards.

For buildings in Rivne erected in different periods, special attention is paid to the condition of reinforced concrete structures and engineering utilities, which often experience significant wear and tear. Modern non-destructive testing methods are used to identify hidden structural defects. Read more about how thermal imaging checks help identify hidden insulation and other structural defects in our article.

Algorithm of Work Execution

The technical inspection procedure is structured according to the following algorithm:

1. Preparatory stage. Analysis of existing design, as-built, and operational documentation. The scope and methods of research are determined, and the site visit schedule is agreed upon.
2. Visual inspection. Initial walkthrough of all premises, basements, attics, and facades with the recording of obvious defects — cracks, delamination, corrosion, leak traces. Photographic documentation of problem areas is performed, and a preliminary defect map is compiled.
3. Instrumental measurements. Application of specialized equipment to obtain quantitative characteristics of structural condition.
4. Preparation of a technical report. Documenting all results with detailed descriptions, tables, charts, conclusions, and recommendations. The report is signed by certified engineers and, if necessary, registered in the EDESSB.

Inspection Result and Its Legal Significance

Based on the inspection results, the customer receives a technical report registered in the Unified State Electronic System in the Construction Sector (EDESSB). The document contains:

• description of the object’s actual condition — detailed analysis of each structural element with calculations and photographic documentation;
• technical condition category with assessment of the residual structural lifespan in accordance with DSTU 9273:2024;
• list of identified defects indicating the nature, location, and probable causes of each;
• recommendations for restoration, reinforcement, or dismantling.

The process of preparing a technical report on the inspection of building structures is key for submitting documents to local self-government bodies or insurance companies. In cases where destruction is critical, dismantling or demolition of buildings and structures may be required, which also necessitates proper technical justification.

Factors Influencing Cost and Timelines

The cost of a technical inspection of buildings in Rivne is determined individually for each facility. Key pricing factors are the area and number of storeys of the building, structural complexity, the need to use specialized equipment, accessibility of structural elements for inspection, and the availability of design documentation. Work duration depends on the complexity of the object — for an apartment or a small private house, usually a few working days from the site visit to the finished report are sufficient; for commercial or industrial objects where laboratory sample testing is required, timelines can be longer. GlobalBud Ukraine provides a full cycle of technical inspections of real estate objects with subsequent registration of the report in the EDESSB.

Frequently Asked Questions

Is it mandatory to conduct a technical inspection of a building in Rivne before capital repairs?

Yes, according to DSTU-N Б В.1.2-18:2016, a technical inspection is mandatory before major repairs or reconstruction of buildings. This makes it possible to determine the actual condition of structures and justify the scope of necessary work. For buildings included in municipal stock renewal programs, a technical conclusion is a necessary condition for obtaining funding.

What documents confirm the results of a technical inspection?

The inspection results are formatted as a technical report, which is registered in the EDESSB. This document has legal force and can be used for submission to local self-government bodies, insurance companies, or court.

Is it possible to conduct a technical inspection of a building in Rivne without design documentation?

Yes, the inspection is carried out based on the actual condition of the structures. The absence of design documentation is not an obstacle to performing the work, although having a technical passport significantly simplifies the diagnostic process.

What is the frequency of technical inspections for buildings in Rivne?

For objects with an operational lifespan of over 50 years, it is recommended to conduct inspections with a frequency specified in the technical passport or determined by the owner’s decision. For buildings planned for inclusion in capital repair programs, inspections are carried out before design work begins.